Skip to content
| Specification |
Unit |
Light |
Medium |
| Swing over bed |
MM |
165 |
215 |
| Swing over bed |
MM |
320 |
410 |
| Swinging Gap |
MM |
510 |
610 |
| Swing over cross Slide |
MM |
180 |
280 |
| Admit Between Centre |
MM |
700/930/1050 |
520/740/960 |
| Spindle Bore |
MM |
40 |
52 |
| Bed type |
TYPE |
2 V & 2 FLAT |
2 V & 2 FLAT |
| Bed Width |
MM |
240 |
280 |
| Quill Tail Stock Taper |
MT |
3 |
3 |
| Speed |
RPM |
40-800 |
35-500 |
| Electric Motor Power |
H.P. |
1.5 |
2.0 |
- Hardend and Ground bedways
- Change Gear Set (inch & mm)
- Chuck Plate
- Tool Post Key
- Centre Adaptor
- Dead Centres
- Drive V-Belt
- Motor Pulley
- Four Position Tool Post with Bolt and Key
- Chiptray
- Self Centering Chuck
- Independent Jaw Chuck
- Electric Motor & V-Belt
- Full Norton Gear Box
- Six Feed Gear Box
- Coolant Pump, Tank and Nozzle
- Quick Change Tool Post/Rear Tool Post
- Tapper Turning Attachment
- Reverse-Forward Switch
- Steady Rest
- Follow Rest
- Face Plate
- Toolpost Grinder External & Internal Type
- Keyway Cutting Attachment
- Special Accessories And Fixtures
