Skip to content
| SPECIFICATION | UNIT | LIGHT | MEDIUM |
| | | |
| Height Of Centre (mm) | MM | 165 | 215 |
| Swing over bed | MM | 320 | 410 |
| Swinging Gap | MM | 510 | 610 |
| Swing over cross Slide | MM | 180 | 280 |
| Admit Between Centre | MM | 700/930/1050 | 520/740/960 |
| Spindle Bore | MM | 40 | 52 |
| Bed type | TYPE | 2 V & 2 FLAT | 2 V & 2 FLAT |
| Bed Width | MM | 240 | 280 |
| Quill Tail Stock Taper | MT | 3 | 3 |
| Speed | RPM | 40-800 | 35-500 |
| Electric Motor Power | H.P. | 1.5 | 2.0 |
- Hardend and Ground bedways
- Change Gear Set (inch & mm)
- Chuck Plate
- Tool Post Key
- Centre Adaptor
- Dead Centres
- Drive V-Belt
- Motor Pulley
- Four Position Tool Post with Bolt and Key
- Chiptray
- Self Centering Chuck
- Independent Jaw Chuck
- Electric Motor & V-Belt
- Full Norton Gear Box
- Six Feed Gear Box
- Coolant Pump, Tank and Nozzle
- Quick Change Tool Post/Rear Tool Post
- Tapper Turning Attachment
- Reverse-Forward Switch
- Steady Rest
- Follow Rest
- Face Plate
- Toolpost Grinder External & Internal Type
- Keyway Cutting Attachment
- Special Accessories And Fixtures
Price On Request
